Procedure For Working Safely With Electricity

In this training the OHS document "Procedure For Working Safely With Electricity" is broken up into a 6 part

video series. As the videos progress through the document, key points are extracted and covered as they bring

across the intent of the document which is to make sure that the Bureau is a safe place to work and that every

worker when working with electricity does so in a safe and competent manner.

Method:
Blended
Duration: Approx 90 minutes. The course uses a series of videos that dive deep into the OHS procedure.
Assessment: There is a quiz after each section and a final quiz for assessment.
Help: Contact the BMTC Electronic Technical Trainers

Lockout Tagout Isolation - Circuit breaker lock, padlock and danger tag

To provide a process for the safe isolation of energy sources to reduce the risk of injury while equipment is being

inspected, repaired, replaced, maintained, assessed, adjusted, constructed or cleaned.

This training walks through the Occupational Health and Safety "Lockout Tagout Isolation Procedure".

The document is present through interactive web pages and a short practical video.

The Permit to Work for Bureau Workers and Contractors are also introduced as is the use of a digital signature to

aid in the management of these particular PDF documents.

 

 

Method:
Blended
Duration: 45 - 90 minutes. Including videos and web pages and quizzes.
Assessment: There is a quiz after each section and a final quiz for assessment.
Help: Contact the BMTC Electronic Technical Trainiers.